Partioning with Parted

https://trisquel.info/en/wiki/how-format-external-storage-device-using-parted This page has instruction on how to make an aligned partition with Parted. For an SD card to use in the WiiU, the formating must be done with FAT32 with bigger clusters: mkfs.vfat -F 32 -s 128 /dev/sdd1

Article clair sur le reverse SSH

http://geekfault.org/2011/02/19/reverse-ssh-acceder-a-un-serveur-derriere-un-natfirewall/ Memo pour me faire une machine de sauvegarde avec mon dockstar vers laquelle je puisse faire mes rsync, où qu’elle soit connectée (même derrière le NAT d’une nouvelle Box non configurée ou un accès 3G/4G). Pour compléter un rappel pour génération de clés RSA: http://jeyg.info/ssh-authentification-par-cles-rsa-ou-dsa/ Lancer un script au démarrage dans Archlinux: https://wiki.archlinux.org/index.php/Systemd_FAQ#How_can_I_make_a_script_start_during_the_boot_process.3F Faire une sorte de watchdog avec cron et un script de vérification du PID: http://letitknow.wordpress.com/2012/12/31/keeprun/

SHE Super Hybrid Engine on Linux without Jupiter

I’m using an Asus eeePc 901 with Xubuntu 12.04.Jupiter is installed on it for a convenient way to manage the SHE. The SHE enables control over the FSB, it is very efficient to further reduce the battery usage, and is independent of the cpufreq governors. I will soon upgrade to the 14.04 version of Xubuntu, so I looked into the replacements. Everybody talks about TLP but this doesn’t manage the SHE of the eeePCs.

Patching a rom with xdelta3 on ubuntu

I wanted to get Fire Emblem 12 for the Nintendo DS in english. The team doesn’t provide instructions for Linux. Install xdelta3 with a simple: sudo apt-get install xdelta3 Then the command to patch your rom is: xdelta3 -dfs IN.nds NAMEOFPATCH.delta OUT.nds Enjoy !

Hostapd configuration for a 802.11n AP with ath9k

At home I have a good cable internet access but the router/modem combo that my ISP provides includes wireless G (54Mbit/s) AP and a fastEthernet switch (100 Mbit/s). So when I bought my new server, I was planning to use it as an upgrade for both my wired and wireless networks. The HP microserver has 2 low profile PCIex slots so I bought a cheap gigabit ethernet card and a cheap 150Mbit/s atheros chipset based wifi card :

Launching XBMC from an Android remote on a dedicated Debian HTPC

I bought recently a HP microserver to upgrade from my previous server that was a Seagate Dockstar.   One of the goals I had in mind was to use the server not only as a NAS, webserver, etc… but also as a HTPC running XBMC (and as a gigabit switch and a 802.11N AP but more on that later). I was running Debian Squeeze for ARM on the Dockstar and went for Debian Wheezy (tesing for now) for the Proliant as it has a more recent kernel to build my AP, and XBMC Eden is available directly in Debian repositories.